The weather plays a huge role in all of our lives. From winter to summer, your driveway sure takes a beating! Even if you live in a beautiful warmer climate, you’ll still have to keep up with your driveway and landscape. So what happens when you have a giant hole in the middle of your asphalt driveway? Well, fixing the whole requires dedication and the right tools. There’s no do-it-yourself resurfacing solution that will fix it for good. Luckily, a temporary solution can be in place until the expert Denver asphalt repair team can tend to the job.
There’s A Hole In My Driveway!
If you find a hole of any kind in your asphalt, it’s best to tackle the issue right away. Pavement issues happen all the time, even though pavement is made to stand up to the heavy weight of traffic and weather. But over time, it will deteriorate and wear. Raveling is a common issue with asphalt and it’s usually the result of the breakdown of the pavement, involving a lot of loose gravel and dirt. Depression is another asphalt issue typically caused by poor compacting by a local Denver asphalt repair team. Alligator cracking is typically spotted on heavy traffic sites, such as roads or even commercial lots. This is caused by a structural failure and is common over time. Block cracking is another poor paving technique. Older and dried out asphalt will also cause this to occur. Potholes are common and happen during weather changes, heavy traffic and standing water. Another common asphalt issue is edge cracks. This is produced by heavy traffic, poor drainage, and inadequate underlying, and is spotted near the edge of the pavement.
This is where you put your DIY cap on and create a temporary fix for your asphalt failure. These careful steps will stop the problem from getting worse while keeping your family and friends safe.
Discerning the type of crack or hole you have in your asphalt and how it occurred will determine if necessary steps for your temporary repair. Remember, this is a temporary fix and only a Denver asphalt repair expert will be able to bring the job to completion.
First, make sure you gather your tools, such as weeding gloves, caulking gun, and a broom for cleanup. You may want to grab a hammer for leveling the filled in hole. Next, assess the size of the damage. Anything bigger than two square feet should be done by a professional. Next they’ll remove any weeds that are around the area and identify the filler for your asphalt (the mixture of tar and rocks). This can come in 50 lb bags. You’ll then wet the soil prior to getting started. Have your broom or shovel ready to take the debris out of the hole to make sure that the soil is wet and ready for compacting. If your hole is deep, you’ll want to fill it with material such as rocks or limestone to ensure that once you apply the asphalt filler, it is even with the rest of your driveway. Now you add the filler! It needs to be at least an inch higher than your driveway. To ensure this, you’ll need to level the filler. A hand tamper or compactor would be used for larger holes; however, a hammer will suffice for smaller ones.
This temporary solution makes all the difference in the appearance and functionality of your driveway. So when you are ready, call the Denver asphalt repair experts at Local Motion Services today so you can get your driveway back to its old self again.